RAD ETX-2i Carrier Ethernet Demarcation with D-NFV

100 GbE
1/10GbE SFP+ (with 1G/10G multirate support)
FE/GbE SFP
Extension slot for network interface module
Extension slot for D-NFV module
PDH (GFP mapping)
SHDSL
VDSL2
E1/T1/T3/STM-1/OC3 via integrated Smart SFP (MiRIC)
E1/T1/T3 PWE services via integrated Smart SFP (MiTOP)
E1 PWE services via built-in E1 ports
Optional timing (2 MHz, 2 Mbps, 1PPS, ToD)

Networking Capabilities

Available on ETX-2i-Fixed-Ports, ETX-2i-64E1, ETX-2i/M&D-NFV, ETX-2i-B, ETX-2i-B-D-NFV, ETX-2i-10G, ETX-2i-100G :

Ethernet E-LAN, E-Tree, and E-Access services
Layer-2 forwarding
Flow classification rules
ACL classification rules
Available bandwidth measurements for Layer-2 services
2-rate/3-color policing per EVC.CoS
Shaping per EVC and EVC.CoS
MultiCoS EVCs per MEF 10.3 policing
Strict priority and weighted fair queuing (WFQ) scheduling
G.8031 linear protection
1:1 link protection with 1:1 LAG/LACP
1:1 link protection with dual homing
LAG with load balancing
Jumbo frame support

Select the additional networking capabilities options required in your application:

Embedded router supporting VRFs, static routing, BGPv4, OSPFv2, BFD, and VRRP
NAT
DHCP server
Ethernet over IP/GRE
G.8032v2 ring protection

ETX-2i Timing and Synchronization:
Available on ETX-2i-Fixed-Ports, ETX-2i-64E1, ETX-2i/M&D-NFV, ETX-2i-B, ETX-2i-B-D-NFV, ETX-2i-10G, ETX-2i-100G :

Select additional Timing and Synchronization options

Synchronous Ethernet (SyncE) on all interfaces
IEEE-1588v2 precision time protocol (PTP) per G.8265.1 and G.8275.1 Telecom profiles
Best Master Clock Algorithm (BMCA)

General and Management
Available on ETX-2i-Fixed-Ports, ETX-2i-64E1, ETX-2i/M&D-NFV, ETX-2i-B, ETX-2i-B-D-NFV, ETX-2i-10G, ETX-2i-100G :

Zero-touch provisioning (DHCP, PPPoE)
SNMPv1/v2/v3
RADIUS and TACACS+ AAA
Network time protocol (NTP)
NETCONF
MEF CE2.0

Select addtional general and power options

Power supply redundancy
NEBS option
Temperature hardened option