ADTRAN - Call 727-398-5252 : Cutter Networks


Adtran section home Adtran Specials and more Adtran section search Adtran quote request

ADTRAN T1 CSU ACE  ADTRAN T1 ESF CSU ( 1204025L1, 1202066L1 ) ADTRAN T1 ESF CSU  1204025L1, 1202066L1

The ADTRAN T1 ESF CSU  ACE (  1204025L1, 1202066L1 ) s a full-featured T1 Channel Service Unit used to connect T1 data terminal equipment (DTE) such as a PBX, switch or channel bank to T1 facilities. Capable of interfacing to both B8ZS or AMI circuits, the ADTRAN T1 ESF CSU ACE 1204025L1, 1202066L1 can convert signal formats or line code to integrate older equipment. The ESF CSU is designed to provide alarms, loopbacks, signal regeneration, line build-out, and surge protection, while maintaining 1s density for the DTE and T1 network. The ADTRAN T1 ESF CSU ACE   ( 1204025L1, 1202066L1 )  is suitable for wall- or rackmounting or desktop use, while the T1 ESF CSU Smart 16 Card occupies a single slot in the rackmount ADTRAN Smart 16 shelf. The standalone models provide a front panel LCD, four user keys on the front of the ACE, and provides easy configuration and unit monitoring from the front panel. The ESF CSU provides an EIA-232 port (DB-9) for provisioning through a VT100 interface. The Smart 16 ESF CSU card can be controlled from the shelf controller through a VT100 interface or the optional Datamate. For SNMP management, the Smart 16 ESF CSU card is supported by the Smart 16e controller and the ADVISION software package. The ADTRAN T1 ESF CSU ACE 1204025L1, 1202066L1 provides a T1 network interface and a DSX-1 DTE connection through modular RJ48C jacks. For testing purposes, the ADTRAN T1 ESF CSU 1204025L1, 1202066L1 is capable of initiating several built-in local and remote loopback tests and conducting stress testing of the network with built-in test patterns. For more extensive network testing, the unit uses bantam jack access for external test equipment. To aid with circuit monitoring, the ADTRAN T1 ESF CSU ACE 1204025L1, 1202066L1 gathers AT&T maintenance information in 15 minute intervals for 24 hours, which is fully accessible over the FDL or via the Smart 16 controller. Remote configuration is made simple by using the FDL channel for the standalone ACE or the Smart 16 controller interface for the rackmount version. Using the remote configuration capability of the ADTRAN T1 ESF CSU ACE  1204025L1, 1202066L1 enables central site control and setup for ADTRAN T1 CSUs or TSU devices. The standalone ACE includes an auto-ranging 12-48V internal DC power supply and wallmount AC power supply. The L2 version adds a terminal block for easier connection to an external DC supply. For additional T1 applications, ADTRAN provides several T1 DSU/CSUs and T1 Multiplexers for combining traditional DSX-1 functionality with additional DTE ports. The TSU 100e, TSU 120e and TSU 600e are modular T1 DSU/CSUs with embedded SNMP and are capable of supporting a single DSX-1 interface and up to 22 DTE interfaces for data or video applications.

1202066L1 ADTRAN T1 ESF CSU ACE Rackmount 

ADTRAN T1 ESF CSU ACE   ( 1204025L1, 1202066L1 )  data sheet (pdf 56 k)


                    Immediate price quote - Call 727-398-5252

Specials   E-mail us   Bookmark this site   More Adtran    Important Notices

Use Visa to purchase Data Communications Equipment    Use MasterCard to purchase ADTRAN Equipment
ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc.Adtran Logo
E-mail: Webmaster about the Adtran portion of this site.
Last modified: November 15, 2011
1998-2017 Cutter Networks Inc - All rights reserved