

Adtran
NetVanta 3200
Modular Access Router - Single Slot/Single Ethernet
The Adtran NetVanta 3200 is an access router designed for cost-effective
Internet access, corporate Frame Relay, point-to-point connectivity, and Virtual
Private Networking (VPN) for applications requiring bandwidth from 56k to
dual-T1s. Residing in a standalone desktop chassis with a plastics enclosure,
the NetVanta 3200 is a single platform that offers one interface slot and one
10/100Base-T Ethernet LAN port. The modular NetVanta 3200 will house a variety
of Network Interface Modules (NIMs) and includes a Stateful Inspection Firewall,
QoS for delay sensative traffic like VoIP, NAT and DHCP, and all managed with a
familiar Command Line Interface (CLI).
 | Supports up to dual-T1s worth of bandwidth
 | Interchangeable Network Interface Modules (NIMs): 56/64K, T1/FT1, T1/FT1
with DSX-1, Dual T1, E1/FE1, E1/FE1 with G.703, ADSL and Serial
 | Stateful inspection firewall protects against Denial of Service (DoS)
attacks
 | QoS with Low Latency and Weighted Fair Queuing and DiffServ marking for
delay sensitive traffic like VoIP
 | PPP dial backup for disaster recovery scheme back to a PPP compliant
device
 | VLAN trunking allows routing between VLANs
 | Built-in DSU/CSU protects circuit
 | Supports BGP, OSPF, RIP, static routes, and bridging
 | Network Address Translation (NAT/NAPT) conceals private IP addresses
 | NAT-compatible SIP ALG
 | Auto-sensing 10/100BaseT interface to accommodate mixed Ethernet
environments
 | Command Line Interface (CLI) which mimics de facto industry
standard and a user-friendly web-GUI
 | Optional DSX-1 interface available for voice connectivity to a PBX
 | Optional Analog or ISDN BRI dial backup system prevents network downtime
 | Optional VPN - 5 IPSec tunnels using DES/3DES/AES encryption
 | Analog Modem module used for dial backup or remote management
 | Industry-leading five-year warranty
 | Desktop chassis
|
| | | | | | | | | | | | | | | | |
|