Transition Networks

      Transition Networks - call: 727-398-5252 Cutter Networks for your best source

[Home][Adtran][Cisco][FatPipe][Fluke][Motorola][Multi-Tech][RAD][Sycamore]

Transition Networks section home Specials on Transition Networks and other LAN / WAN data communications equipment Search for Transition Networks and other LAN / WAN data communications equipment Request a quote on Transition Networks and other LAN / WAN data communications equipment

Transition Networks

Transition Networks SCSCF30 xx-10x DS3-T3/E3 Coax to Fiber NID (Network Interface Device) 

There is a newer enhanced version of this product. It is the SCSCF30 xx-11x .

The SCSCF30 xx-10x NID from Transition Networks is used to extend a DS3 or E3 over fiber

Transition Networks models SCSCF3011-100 SCSCF3013-100 SCSCF3014-100 SCSCF3015-100 SCSCF3016-100 SCSCF3017-100 SCSCF3029-100  SCSCF3029-101 SCSCF3029-102 SCSCF3029-103

The SCSCF30 xx-10x DS3-T3/E3 copper to fiber NID will provide a solution for those users that desire to extend the point of presence of their DS3 or E3 connection or use it to connect remote locations via T3 / E3 .  The SCSCF30 xx-10x devices must be used in pairs. Typical installation will include a chassis card (CCSCF) installed in the Point System™ locally and a stand-alone device installed at the remote location.

Some of the features of the Transition Networks SCSCF30 xx-10x NIDs include:

AIS (Alarm Indication Signal) All 1’s or Blue detected on both ports. (unframed)
AIS generated in both directions selectable Blue or 1’s.
Digital Loopback on fiber & copper ports
Coax Line build out for operation less than 255 ft. or 255 ft. to 1000 ft.
Switch selectable DS3 / T3 or E3 rate
LED indications for all operation modes
Supports fractional/channelized DS3/E3

Dual fiber models:
SCSCF3011-100 (2) Coax (BNC) to 1300 nm multimode (ST) [2 km/ 1.2 mi.] Link Budget: 11.0 dB
SCSCF3013-100 (2) Coax (BNC) to 1300 nm multimode (SC) [2 km/ 1.2 mi.] Link Budget: 11.0 dB
SCSCF3014-100 (2) Coax (BNC) to 1310 nm single mode (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB
SCSCF3015-100 (2) Coax (BNC) to 1310 nm single mode (SC) [40 km/24.9 mi.] Link Budget: 26.0 dB
SCSCF3016-100 (2) Coax (BNC) to 1310 nm single mode (SC) [60 km/37.3 mi.] Link Budget: 29.0 dB
SCSCF3017-100 (2) Coax (BNC) to 1550 nm single mode (SC) [80 km/49.7 mi.] Link Budget: 29.0 dB

Single Fiber Products
Recommended use in pairs. The RX frequency on one end of the link must match the TX on the other end of the link.
SCSCF3029-100 (2) Coax (BNC) to 1310 nm TX / 1550 nm RX single fiber single mode (SC) [20 km/12.4 mi.] Link Budget: 19.0 dB
SCSCF3029-101 (2) Coax (BNC) to 1550 nm TX / 1310 nm RX single fiber single mode (SC) [20 km/12.4 mi.] Link Budget: 19.0 dB

SCSCF3029-102 (2) Coax (BNC) to 1310 nm TX / 1550 nm RX single fiber single mode (SC) [40 km/24.9 mi.] Link Budget: 25.0 dB
SCSCF3029-103 (2) Coax (BNC) to 1550 nm TX / 1310 nm RX single fiber single mode (SC) [40 km/24.9 mi.] Link Budget: 25.0 dB

Optional Accessories (sold separately)

Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS Piggy Back Power Supply
SPS-1872-SA Stand-Alone Power Supply

Mounting Options:
E-MCR-05 12-slot Media Converter Rack
WMBD DIN Rail Bracket 5.0" [127 mm]
WMBD-F DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL Wall Mount Bracket 4.0" [102 mm]
WMBV Vertical Wall Mount Bracket 5.0" [127 mm]
RMS19-SA4-01 4-slot Media converter shelf
Transition Networks models SCSCF3011-100 SCSCF3013-100 SCSCF3014-100 SCSCF3015-100 SCSCF3016-100 SCSCF3017-100 SCSCF3029-100  SCSCF3029-101 SCSCF3029-102 SCSCF3029-103

SCSCF30 xx-10x NID product data sheet (pdf)

 

                    Immediate price quote - Call 727-398-5252

Specials   E-mail us   Bookmark this site   More Transition Networks     Important Notices

Use Visa to purchase Data Communications Equipment    Use MasterCard to purchase Transition Networks Equipment
E-mail: Webmaster about the Transition Networks portion of this site.Transition Networks
Last modified: March 31, 2017
© 1998-2017 Cutter Networks Inc - All rights reserved