
Adtran TSU 600
The
ADTRAN TSU 600 (
1202076L2 , 1202076L2#DC ) and TSU 600e
( 120276L1 , 1202076L1# DC ) are modular,
full-featured T1/FT1 Integrated Access Devices (IADs) designed to support a wide
range of end-user applications.
Through the six expansion slots on the
rear
of the ADTRAN TSU 600
( 1202076L2 , 1202076L2#DC )
and TSU 600e ( 120276L1 , 1202076L1# DC )
the user has complete flexibility in the type of DTE interfaces required
for the T1 application. By supporting up to 24 DTE interfaces, the ADTRAN TSU
600 (
1202076L2 , 1202076L2#DC ) and TSU 600e ( 120276L1 , 1202076L1# DC )
provide the same functionality as a traditional channel bank, while
providing a small form factor and end-user oriented features. The TSU 600e (
120276L1 , 1202076L1# DC ) provides
complete monitoring and control of internal functions with embedded Simple
Network Management Protocol (SNMP) provided through a SLIP interface. The TSU
600e ( 120276L1 , 1202076L1# DC ) has
the added benefit of an integrated 10Base-T Ethernet interface. Support for
future growth, through the units six
expansion slots, is a key feature of the ADTRAN TSU 600
( 1202076L2 , 1202076L2#DC )
and TSU 600e ( 120276L1 , 1202076L1# DC ). The ability to combine many types
of plug-in and plug-on modules provides extensive combinations of voice and data
interfaces. Several data modules are available for single and dual-port access
to Frame Relay, DDS or Basic Rate ISDN services provided over T1 facilities.
Voice modules are also easily integrated, allowing access to analog voice
circuits or PBX connections. As a fully functional T1 Multiplexer, the ADTRAN
TSU 600 (
1202076L2 , 1202076L2#DC ) and TSU 600e ( 120276L1 , 1202076L1# DC )
support all mixed-mode networking applications providing termination for
circuits containing voice, data and video applications. Configuration and
management of the ADTRAN TSU 600 (
1202076L2 , 1202076L2#DC ) and TSU 600e ( 120276L1 , 1202076L1# DC )
is available through a variety of methods. The ADTRAN TSU 600
( 1202076L2 , 1202076L2#DC )
and TSU 600e ( 120276L1 , 1202076L1# DC )
supports SNMP with gets, sets and traps functionality through a built-in
agent. ADTRAN Enterprise MIBs support management for the ADTRAN TSU 600
( 1202076L2 , 1202076L2#DC )
and TSU 600e ( 120276L1 , 1202076L1# DC )
and all installed expansion modules. For access to SNMP features, the TSU
600e ( 120276L1 , 1202076L1# DC ) has
both a 10BaseT ethernet and a SLIP (EIA-232) connection, while the ADTRAN TSU
600 (
1202076L2 , 1202076L2#DC has a SLIP interface only. In addition to SNMP,
the unit utilizes the management capabilities found in optional software
products from ADTRAN including N-Formฎ (TSU
600e only) and T-Watch PRO.