|
| |
   
WANsuite® 7105 T1/FT1 CSU/DSU from Verso Verilink
WANsuite® 7105 T1/FT1 CSU/DSU is an intelligent T1/FT1 CSU/DSU solution that addresses the challenges associated with space
limitations, network costs and configuration complexities in a legacy and packet-based environment.
Verso Verilink WANsuite® 7105 T1/FT1 CSU/DSU is both Intelligent and cost effective
The Verso WANsuite® series consists of intelligent WAN access devices, ranging from low-cost CSU/DSUs to fully Integrated Access
Devices (IAD). The WANSuite 7105 is a highly intelligent, softwarebased T1/F1 CSU/DSU with a network port, an asynchronous
supervisory port; and a 10/100 Base-T Ethernet interface. The WANsuite 7105 is a stand-alone or rack mountable triple T1
integrated access device (IAD). Based on the Motorola MPC860 processor which runs at 40 MHz, the WANsuite 7105 delivers up to
50 MIPS of CPU power, providing increased performance at a significant cost savings.
Verso Verilink WANsuite® 7105 T1/FT1 CSU/DSUSupports convergence and migration to emerging network services
The WANsuite platform provides a migration path that protects customers’ investments as they transition to emerging network
services. Boasting triple T1 network ports, two data ports, and an Ethernet port, the WANsuite 7105 meets various networking needs.
All WANsuite 7105 network ports are lightning protected, software configurable as a DSX or T1 port, and can run TDM or packet data.
Verso Verilink WANsuite® 7105 T1/FT1 CSU/DSU - The solution for wireless providers
The 7105 can be used for private leased line or Frame Relay networks, T1 or Fractional T1 connections. It is a shelf-based card that
fits into any AS2000 chassis. Ideal for wireless providers implementing a network-based e991 Phase 2 solution or planning
wireless network overlay, each unit offers one network port, two drop and insert ports, two serial
data ports, and one Ethernet port. The card’s built-in mini-DACS simplifies installation whether running in a
daisy-chain configuration or simply splitting bandwidth between wireless equipment. The 1RU footprint allows for base station
integration even in the tightest of spaces.
The WANsuite 7105 can groom data from any of its interfaces onto a single T1 via its built-in Mini-DACS. Integrated Automatic Protection
Switching (APS) provides immediate facility back-up to protect the most critical network locations and can be configured for use
with a single service provider or as a back-up using an alternate carrier. With the WANsuite 7105 utilization can also be measured on each
interface to ensure the most effective use of bandwidth. Bandwidth allocation/migration can be remotely controlled via an easy-to-use
Web browser interface or an SNMP MIB browser.
A future proof investment with Verso Verilink WANsuite® 7105 T1/FT1 CSU/DSU
The WANsuite 7105 provides the flexibility needed to support TDM applications today and packet needs of tomorrow. It gathers network
statistics for Layer 1, Layer 2, and Layer 3, auto discovers DLCIs, offers LMI sourcing to maintain the frame circuit in event of
equipment failure, and provides the statistics needed to enforce Service Level Agreements
(SLAs). It also supports SNMPv.2 and remote management with a simple-to-use Web browser interface.
Verso Verilink WANsuite® 7105 T1/FT1 CSU/DSU Simplified Management and Reporting
The WANsuite platform offers simplified, cost effective, end-to-end network management capabilities and application readiness. The
WANsuite platform provides service providers and enterprise customers the ability to verify SLAs, isolate performance problems,
determine appropriate bandwidth needs, and monitor network trends to aid in future capacity planning. Also, the WANsuite 7105
provides visibility into the network via its Web-based application and supports “Virtual Truck Rolls,” allowing network managers to
troubleshoot their networks remotely and reduce costly on-site visits.
Verso Verilink WANsuite® 7105 T1/FT1 CSU/DSU Features and Capabilities
• TDM, Frame Relay
• Three T1 Network ports
• Automatic Protection Switching
• Mini-DACS - Assign DS0s to any interface independent of time slots
• Redundant power with circuit breakers
• Compact design allows two units in one rack
• 10/100Base-T for management and/or IP routing
• SNMP Management with email notification
• WANsight™ – Web-server interface for remote access with password lockout
• ServiceAware™ technology for maximizing available WAN bandwidth
• Service Level Agreement (SLA) verification
• Resource Management up to Layer 3
• Real-time measurement of bandwidth utilization
WANsuite 7105 T1/FT1 CSU/DSU product
data sheet (pdf)
|
