|
RAD Inverse Multiplexers
IMXi-4 inverse mux is the most recent addition to
the RAD inverse mux product group
RAD IMX-4T1
T1 Inverse Multiplexer
Provides inverse multiplexing to transmit a single high speed data channel over up to 4 T1 links
Data rates from 1.472 to 5.888 Mbps, with automatic rate fallback
Sync data port interfaces: V.35, RS-530, V.36/RS-449, X.21 or HSSI
Optional full remote Ethernet bridge for data port
Complies with:
ITU Rec. G.703, G.704
AT&T TR-62411
ANSI T1.403
AT&T ACCUNET Fractional T45 Service
Several system and data port timing options
Compensates for differential delay of up to 64 msec
Built-in BERT (V.52) and remote/local loopbacks
Control via front panel or ASCII termina
RAD IMX-4T1 inverse multiplexer (mux) pdf
data sheet
RAD IMX-4T1 inverse mux pdf installation
manual
RAD IMX-2
ISDN Inverse Multiplexer and Backup Unit
Supports ISDN backup of leased lines and Dynamic Bandwidth Allocation
Provides Bandwidth On Demand (smart terminal adapter)
Operates over a combination of two switched (B channels) and one leased line
Integrated terminal adapter supports Euro-ISDN, 5ESS, National ISDN (NI1), DMS-100 and NTT
RAD IMX-2 Supports "S" and "U" interfaces
Supports S0 leased line
Supports BONDING 1, 2 and 3 protocol specifications
Differential delay of up to 512 msec
Configuration via front panel or control port on RAD IMX-2
Resilient operation with failure recovery
SNMP support using SLIP protocol
Software download via Xmodem protocol
RAD IMX-2T1/E1
E1 to T1 Inverse Multiplexer
Inverse multiplexing of a standard E1 frame on two T1 links
Complies with:
ITU Rec. G.703, G.704
AT&T TR-62411, TR-54019
ANSI T1.403
AT&T ACCUNET Fractional T45 Service
Several timing options
Compensates for differential delay
Control via front panel or ASCII terminal / Telnet
Telnet using SLIP protocol
Inband remote management
Data port supporting n x 128 kbps
Fractional T1 port supporting n x 128 kbps
Transparent to E1 timing
Built-in CSU on the T1 links
Call-in and call-out functions
Built-in BERT and loopbacks
RAD IMX-2T1/E1 Inverse multiplexer pdf
data sheet
RAD IMX-2T1/E1 Inverse mux pdf
manual
RAD IMX-4E1
E1 Inverse Multiplexer
Provides inverse multiplexing to transmit a single high speed data channel over up to 4 E1 links
Data rates from 1.92 to 7.68 Mbps, with automatic rate fallback
Sync data port interfaces: V.35, RS-530, V.36/RS-449, X.21 or HSSI
Optional full remote Ethernet bridge for data port
Complies with ITU-T Rec. G.703, G.704, G.823
Several system and data port timing options
Compensates for differential delays up to 64 msec
Built-in BERT (V.52) and remote/local loopbacks
Control via front panel or ASCII terminal
RAD IMX-64
Inverse Multiplexer
Supports up to six 64 kbps channels
One or two data ports support total bandwidth of 384 kbps
Integrated ISDN (BRI) or external TAs
Supports ISDN backup of high speed leased lines (up to 256 kbps)
Provides Bandwidth On Demand
Dynamic Bandwidth Allocation
Operates over a combination of switched and non-switched lines
Support for Euro-ISDN , 5ESS, National ISDN (NI1), DMS-100 and NTT
Supports "S" and "U" interfaces
Supports S0 leased line
Supports BONDING 1, 2 and 3 protocol specifications
Differential delay of up to 512 msec
Configuration via front panel or control port
Resilient operation with failure recovery
SNMP support using SLIP protocol
Software download via Xmodem protocol l
RAD IMX-64 pdf data sheet
RAD IMX-6L
6 x 64 kbps Inverse Multiplexer for Leased Lines
Transmits a high speed data channel over two to six 64 kbps lines
Supports aggregate data rate of up to 384 kbps
Supports BONDING 1, 2 and 3 protocol specifications
Differential delay of up to 512 msec
Setup and control via supervisory port
Supports applications for:
- LAN internetworking
- Video conferencing
- Channel connection
Also supports G.703 codirectional network interface
SNMP support using SLIP protocol
Software download via Xmodem protocol
RAD IMX-6L pdf data sheet
|
