RAD VAR - Cutter Networks 727-398-5252

[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Micom][Motorola][Multi-Tech][Nortel][RAD][Verlink][Visual Networks]

RAD section home tab  Search for RAD equipment  RAD and other WAN / LAN specials  Request a quote on RAD or other WAN / LAN equip.

RAD data communications

ETX-21 Fast Ethernet Layer 1 Media Converter

Media Converter - Fast Ethernet

ETX-21 is a media converter that provides transparent conversion of optical and electrical signals for the Fast Ethernet service. The ETX-21  media converter is used to extend the operation distance between two copper Fast Ethernet devices via fiber optic infrastructure transparently and with no performance degradation. The ETX-21 media converter card can be installed in the following enclosures:

LRS-20, 16-slot 3U-high modular rack, accommodating up to 16 hot-swappable converter cards. The LRS-20 rack is intended for central site installation.

LRS-1, 1U high standalone unit, accommodating one converter card. LRS-1 is intended for installation at remote sites, or if only a single converter is required.

The following ETX-21 media converter cards are available (see Table 1 for full details):

ETX-21 Fast Ethernet Media Converter

ETX-21/UTP/FE-M media converter, converting between UTP and multimode fiber optic cables, 1310 nm

ETX-21/UTP/FE-1 media converter, converting between UTP and single mode fiber optic cables, 1310 nm

ETX-21/UTP/FE-2 , converting between UTP and single mode fiber optic cables, short haul, 1310 nm

ETX-21/UTP/FE-3, converting between UTP and single mode fiber optic cables, long haul, 1550 nm.

 fiber to copper media conversion

The UTP port of the ETX-21 cards supports user-configurable MDI/MDIX function, correcting connection polarity errors. This allows using straight or crossed cables for the LAN connection.

The user-configurable fault propagation mechanism automatically shuts down the UTP port if a failure is detected on the fiber optic port. The UTP link is re-established when the fiber optic connection is restored.

The autonegotiation function automatically matches the UTP port duplex mode and data rate to the user equipment requirements.

LEDs indicate the fiber optic link status, data transmission and duplex modes statuses of the UTP port.

 Ethernet media conversion

ETX-21 Fast Ethernet media converter product data sheet (pdf)

 

            Immediate price quote - Call 727-398-5252 or e-mail cs@bestdatasource.com

Other RAD sections of interest:

RAD Accessories, RAD  APS-8, APS-16, APS-24 Multiprotocol FRADs/PADs and Switches, RAD ATM products, RAD Baseband modems and last mile access, RAD Cables & Misc, RAD Digital Service Access Devices ( FCD ), RAD Ethernet Fiber Optic Converters, RAD Fiber Optic modems and Converters, RAD HDSL products, RAD Inverse Multiplexer, RAD IP and Ethernet Access, RAD Kilomux Data, Voice, Fax and LAN integrating Multiplexers, RAD Local Multiplexers, RAD LRS Modem rackRAD Media Converters, RAD Megaplex, RAD MIC - Miniature Interface Converters, RAD Medium Range Baseband Modems, RAD Modem Eliminators, RAD Remote access LAN, RAD Networks Management, RAD Optimux Fiber Multiplexers, RAD Rate and Interface Converters, RAD Sharing Devices, RAD Short Range Modems, RAD short range modem compact nest, RAD small sub-rate multiplexers, RAD Statistical Multiplexers, RAD T1/E1 Digital Cross Connects ( DACS ), RAD T1/E1 Digital Cross Connect (DACS) for single E1 / T1 applications, RAD TDMoIP, RAD Universal Interface Converter ( UCI ), RAD Voice Interface Converters, RAD Voice Trunking Gateway, RAD WEB RANger Routers

Specials   E-mail us   Bookmark this site   More RAD    Download RAD catalog (pdf 21,234kb)   Important Notices

Use Visa to purchase Data Communications Equipment    Use MasterCard to purchase Data Communications Equipment
E-mail: Webmaster about the RAD portion this site.RAD logo
Last modified: January 16, 2008
Copyright on RAD portion of web site