ADTRAN - Call 727-398-5252 : Cutter Networks

[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Micom][Motorola][Multi-Tech][Nortel][RAD][Verso][Visual Networks]

ADTRAN section home tab ADTRAN and other WAN / LAN specials Search for ADTRAN or other WAN / LAN equipement Request a quote on ADTRAN or other WAN / LAN equipment

Adtran logo (641 bytes)

ATLAS 800PLUS FRAME RELAY

FRAME RELAY ACCESS FOR HOST LOCATIONS

ATLAS 800PLUS reduces telecommunication expenses by integrating data, voice/fax, and video traffic and then transporting them over frame relay networks. With the appropriate option modules installed, the ATLAS 800PLUS supports access to both public and private frame relay networks for up to four full T1s worth of network bandwidth.

The ATLAS 800PLUS includes a 10BaseT Ethernet port and IP router in support of encapsulating data into frame relay packets. Alternatively, customers can connect ATLAS with an external router through one or more serial ports. ATLAS offers a variety of serial interface options, including V.35, EIA-232, EIA-530, EIA-449, X.21, and V.36.

Voice Over Frame Relay (VoFR) is supported using one or more of the optional Voice Compression Modules to deliver high quality voice among frame relay sites. ATLAS can be configured to transport voice and data traffic within a single PVC, reducing frame relay monthly expenses. An ATLAS 800PLUS system can be optioned to transport up to 64 compressed voice connections over a frame relay network.

ATLAS supports PBX and end-station call switching, automatically detecting the number dialed and routing the call to its proper destination.

The ATLAS 800PLUS provides detailed frame relay statistics monitoring and diagnostic capabilities. Compatible with ADTRAN's desktop IQ family of frame aware CSU/DSUs, ATLAS facilitates network management and capacity planning by monitoring and reporting frame relay parameters such as FECN/BECN counts, round trip delay, lost packets, and many others.

ATLAS offers local and remote management capabilities, including support for inband management through the frame relay network.

The ATLAS 800PLUS is available with the frame relay software option already pre-loaded, or frame relay software can be installed separately.

Features

bulletFrame Relay Access, Concentration and Switching
bulletVoice, data and fax over Frame Relay
bulletIntegral router
bulletMultiple T1 access
bulletStandard RFC1490 encapsulation
bulletPublic and private Frame Relay support
bulletDynamic bandwidth allocation
bulletQoS control
bulletDetailed frame relay performance monitoring
bulletFlash downloadable
bulletAC and -48V DC configurations
bulletIn-band remote Frame Relay management
bulletStandard 5 year warranty

ATLAS 800PLUS FRAME RELAY APPLICATION EXAMPLE

Product Specifications

NETWORK INTERFACE

bulletTwo Built-In T1/DSX-1 ports
bulletOptional Quad T1/DSX-1 module
bulletFull or Fractional T1 support
bulletConnects with network or user equipment under software control
bulletBuilt-in CSU

Line Rate

bullet1.544 Mbps +/- 75 bps

Physical Interface

bulletRJ48C: Modular, 8 pin

Framing

bulletD4(SF), ESF

Line Code

bulletAMI, B8ZS

Input Signal

bullet0 to -36 dB

Line Length

bulletDS-1: 6000 feet (24 AWG)
bulletDSX-1: 665 feet

SERIAL PORTS

bulletProvided through ATLAS option module(s)
bulletFour ports per module
bulletRates up to 2.048 Mbps

Interface Types

bulletV.35
bulletEIA-232
bulletEIA-449/V.11
bulletEIA-530
bulletX.21/V.36

FRAME RELAY

bulletRFC 1490 Encapsulation

Link Management

bulletANSI T1.617-D (Annex D)
bulletITU-T Q.933-A (Annex A)
bulletLMI (Group of four)
bulletAutomatic link management protocol discovery

Congestion Control

bulletFECN/BECN, Discard Eligible (DE)

Quality of Service

bulletUser configurable DLCI priorities

LAN FEATURES

bulletBuilt-in 10BaseT Ethernet port

Route Management

bulletRIP V1, RIP V2, ICMP, DHCP, ARP, IARP, UDP Relay

VOICE FEATURES

Compression Algorithms

bulletG.711, G.726, G.723.1, Netcoder (proprietary)

Echo Cancellation

bulletG.165

Fax Relay

bulletGroup III fax support at 2.4, 4.8, 7.2, 9.6, 12.0, and 14.4 Kbps

MANAGEMENT FEATURES

Frame Relay Performance Statistics

bulletTX/RX packets, state changes, singaling errors, TX/RX full status, TX/RX link integrity status, FECN/BECN count, DE count
bulletMin/Max/Avg delay, dropped packets

CAPACITY

bullet300 PVCs per system
bullet7000 packets per second

PHYSICAL

bulletDimensions: 17.5"W x 12.5"D x 5.5"H
bulletWeight: 15 lbs.
bulletPower: 40W (base unit)
bulletAgency Approvals: UL 1950, CUL, FCC Part 15 (Class A), and FCC Part 68

PRODUCT INCLUDES

bulletADTRAN utilities software (includes TFTP Server, VT 100 Client, Telnet)
bulletTwo RJ48C straight through cables
bulletOne RJ48C crossover cable
bulletOne RJ48-DB15 adapter
bulletUser manual

Option modules detailed specifications are available on module data sheets.
 
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Ordering Information

bulletATLAS 800PLUS, AC - 1200226L1
bulletATLAS 800PLUS, DC - 1200228L1
bulletATLAS 800PLUS with F/R, AC - 4200226L1
bulletATLAS 800PLUS with F/R, DC - 4200228L1
bulletFrame Relay Software - 1200263L1

Download this brochure in pdf format.

                    Immediate price quote - Call 727-398-5252

Specials   E-mail us   Bookmark this site   More Adtran    Important Notices

Use Visa to purchase Data Communications Equipment    Use MasterCard to purchase ADTRAN Equipment
 ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc.Adtran Logo
E-mail: Webmaster about the Adtran portion of this site.
Last modified: November 07, 2007