[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Micom][Motorola][Multi-Tech][Nortel][RAD][Verso][Visual Networks]
|
[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Micom][Motorola][Multi-Tech][Nortel][RAD][Verso][Visual Networks] |
|
The TSU 600 and TSU 600e are modular, full-featured T1/FT1 Multiplexers designed to support a wide range of end-user applications. Through the six expansion slots on the rear of the TSU 600/600e, the user has complete flexibility in the type of DTE interfaces required for the T1 application. By supporting up to 24 DTE interfaces, the TSU 600(e) provides the same functionality as a traditional channel bank, while providing a small form factor and end-user oriented features. The TSU 600(e) provides complete monitoring and control of internal functions with embedded Simple Network Management Protocol (SNMP) provided through a SLIP interface. The TSU 600e has the added benefit of an integrated 10BaseT Ethernet interface. To support critical applications, the TSU 600e also has the capability to support dual redundant power supplies internally. The power supply module is capable of supporting a fully loaded TSU 600e and is hot-swappable. Support for future growth, through the units six expansion slots, is a key feature of the TSU 600(e). The ability to combine many types of plug-in and plug-on modules provides extensive combinations of voice and data interfaces. Several data modules are available for single and dual-port access to Frame Relay, DDS or Basic Rate ISDN services provided over T1 facilities. Voice modules are also easily integrated, allowing access to analog voice circuits or PBX connections. As a fully functional T1 Multiplexer, the TSU 600(e) supports all mixed-mode networking applications providing termination for circuits containing voice, data and video applications. Configuration and management of the TSU 600(e) is available through a variety of methods. The TSU 600(e) supports SNMP with Gets, Sets and Traps functionality through a built-in Agent. ADTRAN Enterprise MIBs support management for the TSU 600(e) and all installed expansion modules. For access to SNMP features, the TSU 600e has both a 10BaseT Ethernet and a SLIP (EIA-232) connection, while the TSU 600 has a SLIP interface only. In addition to SNMP, the unit utilizes the management capabilities found in optional software products from ADTRAN. For Windows 95 or NT, the popular T-Watch PRO software package facilitates easy configuration and monitoring of the TSU 600(e). For more complex network management systems, ADTRANs ADVISION operates on an SNMP Enterprise Management system such as HP OpenView and provides full GUI configuration and control via SNMP. Features
TSU 600 REAR PANEL ( AC & DC )
TSU 600e REAR PANEL
Product Specifications
Ordering Information
|
|
Specials E-mail us Bookmark this site More Adtran Important Notices
|
