[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Micom][Motorola][Multi-Tech][Nortel][RAD][Verso][Visual Networks]

TSU 100e

MODULAR T1-FT1 DSU WITH SNMP

The TSU 100e is a modular, full-featured T1-FT1 DSU/CSU designed to support a wide range of end-user applications. Equipped with a synchronous V.35 DTE interface, the TSU 100e supports applications requiring a high speed data port. As interface requirements increase, the flexibility of the TSU 100e benefits the user with modularity through its expansion slot. The TSU 100e provides complete monitoring and control of the T1 network with embedded Simple Network Management Protocol provided through both a SLIP and a 10BaseT Ethernet interface. To support critical data applications, the built-in V.35 interface on the TSU 100e can be converted to provide dial backup functionality during T1 failure conditions. This feature is supported by the interface and is available using an optional V.35 "Y" cable.

Support for future growth, through the unit's single expansion slot, is a key feature of the TSU 100e. The ability to combine many types of plug-in and plug-on modules provides extensive combinations of voice and data interfaces. Several data modules are available for single and dual-port access to Frame Relay, DDS or Basic Rate ISDN services provided over T1 facilities. Voice modules are also easily integrated allowing access to analog voice circuits or PBX connections. As a fully functional T1 Multiplexer, the TSU 100e supports all mixed-mode networking applications providing termination for circuits containing voice, data and video channels.

Configuration and management of the TSU 100e is available through a variety of methods. The TSU 100e supports SNMP with Gets, Sets and Traps functionality through a built-in Agent. ADTRAN MIBs support management for the TSU 100e and all installed expansion modules. For access to SNMP features, the TSU 100e has both a 10BaseT Ethernet and a SLIP (EIA-232) connection. In addition to SNMP, the unit utilizes the management capabilities found in optional software products from ADTRAN. For Windows® 95 or NT™, the popular T-Watch PRO™ software package facilitates easy configuration and monitoring of the TSU 100e. For more complex network management systems, ADTRAN's ADVISION™ operates on an SNMP Enterprise Management system such as HP OpenView™ and provides full GUI configuration and control via SNMP.

Features

	T1-FT1 DSU/CSU
	Embedded SNMP management via SLIP or 10BaseT Interface
	Integrated V.35 synchronous port with built-in dial backup capability
	Single option module slot supports up to 4 additional DTE ports
	Customer interface modules available for Analog Voice, Digital Voice, DDS, Frame Relay, High Speed Data and ISDN
	Front panel, back-lit LCD for configuration and monitoring
	Extensive network testing and troubleshooting
	T-Watch PRO™ and TELNET support for local and remote units
	5 year warranty

TSU 100e APPLICATION EXAMPLE

TSU 100e REAR PANEL

Product Specifications

NETWORK INTERFACE

Line Rate

1.544 Mbps +/- 75bps

Physical Interface

RJ-48C: Modular, 8-pin

Framing

D4(SF)/ESF, AT&T 54016 or ANSI T1.403

Line Code

AMI/B8ZS

Input Signal

0 to -36 dB

DS0 Assignment

User selectable

T1 Transmit Timing

Network, Secondary NI, Normal (CSU), Internal, Base DSX-1 or Base DTE

V.35 DTE / DBU INTERFACE

Data Rate

Nx56 or Nx64 kbps (N=1 to 24)

Electrical and Mechanical

CCITT V.35, Winchester type, 34 Pin

Clock Options

Normal/Inverted & Internal/External

Dial BackUp

	Accessible on Base V.35 DTE Port
	Requires optional V.35 "Y" Cable
	Rates: Nx56 or Nx64 kbps (N=1 to 24)

DBU Dialing

DTR dialing

DBU Test

Loopback to DCE, Test dial-up network, Force dial backup

MANAGEMENT OPTIONS AND INTERFACES

Control In / Control Out Ports

	Interface: EIA-232, PC Serial Port, Modem or SLIP connection to router
	Physical Connector: RJ-45, modular 8-pin

10BaseT Interface

	Interface: IEEE 802.3 Compliant, 10 Mbps
	Physical connector: RJ-45, modular 8-pin
	Service: SNMP, TELNET, ICMP, ARP, PING, T-Watch PRO

TESTING AND TROUBLESHOOTING

Local

Payload, Line, and DTE Loopback

Remote

	Payload, Line, and DTE Loopback
	Fractional T1 Loopback: Per ANSI T1.403-1995, Annex B
	CSU Loopback (From TELCO)

Test Pattern generator and detector

	QRSS and 511 (selectable DS0s)
	All 0s and All 1s (Transmit Only)

Performance Monitoring

	Error Counts: ES, SES, UAS, % AS, % EFSEC, Alarms and Error Rates
	Reports: NI information stored for last 24 hrs (15-minute increments)
	PRMS: ANSI performance report messages

Network Interface Test Jacks

Bantam Jacks: TX, RX and RXMON

PHYSICAL

	Dimensions: 3.125" H x 12.5" D x 8.5" W
	Weight: 4 lbs.
	Power: 115VAC, 60Hz, 9W
	Agency Approvals: UL 1950, CUL, FCC Part 15 (Class A), and FCC Part 68

ENVIRONMENT

	Operating: 0 to 45° C (32 to 122° F)
	Storage: -20 to 70° C (-4 to 158° F)

PRODUCT INCLUDES

	One 6 ft. modular 8-pin to 8-pin cables
	Modular to female DB-25 adapter
	Two 15 ft. modular T1 cables
	User Manual

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Ordering Information

	TSU 100e - 1202052L1
	V.35 "Y" Cable - 1200196L1

Download this brochure in pdf format.

Immediate price quote - Call 727-398-5252

Specials E-mail us Bookmark this site More Adtran Important Notices

ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc.
E-mail: Webmaster about the Adtran portion of this site.
Last modified: June 05, 2008