[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Micom][Motorola][Multi-Tech][Nortel][RAD][Verso][Visual Networks]

ADTRAN
NT1 ACE³

ISDN NETWORK TERMINATION
Part# 1200236L1

The ADTRAN NT1 ACE³ (part# 1200236L1 ) provides three 2B+D basic rate interfaces between the subscribers' terminal equipment and the ISDN network. Connection to the ISDN network is made with three U interfaces. Connection to the subscribers' terminal equipment is by three S/T interfaces. The U and S/T interfaces on the NT1 ACE³ conform to ANSI and CCITT standards and perform all Layer 1 functions.

The ADTRAN NT1 ACE³ (part# 1200236L1 ) is designed with aesthetics as well as functionality in mind. The unit is enclosed in an attractive, durable plastic housing appropriate for desktop or wall-mount use. The NT1 ACE³ is powered by the external power supply provided with the unit. The unit monitors the S/T interface for over-current fault conditions. If such a condition occurs, the unit automatically limits the amount of delivered current until the fault condition is removed.

The ADTRAN NT1 ACE³ (part# 1200236L1 ) is protected from lightning and harmful line transients on the network interfaces. One hundred Ohm bus termination is provided by the NT1 ACE³.

Six LED status indicators on the NT1 ACE³ aid in fault isolation. Indicators display the status for Power, Network Ready, Network and Customer Errors, and Network Test.

Features of the ADTRAN NT1 ACE³ (part# 1200236L1 )

	Three 2B1Q basic rate U to S/T interfaces in a single enclosure
	Compatible with 2B+D basic rate service
	Conforms to ANSI T1.601-1992 and ANSI T1.605-1991 specifications
	Supports multiple switch vendors; LUCENT 5ESS, NT1 DMS-100, Siemens EWSD, NEC, and National ISDN-1
	Responds to Quiet Mode and Insertion Loss Test
	Provides automatic over-current protection for S/T power
	Provides U-interface lightning protection
	Standard 5 Year Warranty

NT1 ACE³ APPLICATION EXAMPLE

Product Specifications

NTI ACE3 INTERFACE

Network

	Line: 2-wire (TIP and Ring)
	Operating Mode: Full-duplex
	Data Rate: 160 kbps total; 144 kbps available to customer
	Signal Format: 2B1Q
	Output Amplitude: 2.5 Volt, Zero-to-Peak
	Tx Source Impedance: As per ANSI T1.601-1992
	Rx Source Impedance: As per ANSI T1.601-1992
	Receiver Sensitivity: As per ANSI T1.601-1992

Customer

	Line: 4-wire (Tx and Rx Pair)
	Operating Mode: Full-duplex
	Data Rate: 192 kbps total; 144 kbps available to customer
	Signal Format: Alternate mark inversion, 100% duty cycle
	Output Amplitude: 0.75 V, Zero-to-peak
	Tx Source Impedance: As per ANSI T1.605-1991
	Rx Source Impedance: As per ANSI T1.605-1991
	Receiver Sensitivity: As per ANSI T1.605-1991

SWITCH COMPATIBILITY

LUCENT 5ESS, NTI DMS-100, NEC National ISDN-1

AGENCY APPROVAL

FCC Part 15, Class B

ENVIRONMENTAL

	Operating: 0� to 40� C (32� to 122� F)
	Storage: -20� to 70� C (-4� to 158� F)
	Relative Humidity: Up to 95%, non-condensing

PHYSICAL

	Size: 1.625" H, 6.375" D, 9.0" W
	Weight: 9.5 oz
	Power: +12 VDC, 3.3 W dissipation

PRODUCT INCLUDES

	NT1 ACE³
	Two 6' telephone cables (RJ45 to RJ11)
	110 volt wall mount power supply
	User Manual

5ESS is a registered trademark of LUCENT
DMS-100 is a trademark of Northern Telecom

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Ordering Information

NT1 ACE³ & wall-mount power supply - 1200236L1

Download this brochure in pdf format.

Immediate price quote - Call 727-398-5252

Specials E-mail us Bookmark this site More Adtran Important Notices

ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc.
E-mail: Webmaster about the Adtran portion of this site.
Last modified: June 05, 2008

ADTRAN NT1 ACE3

ISDN NETWORK TERMINATION Part# 1200236L1

Features of the ADTRAN NT1 ACE3 (part# 1200236L1 )

NT1 ACE3 APPLICATION EXAMPLE