[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Micom][Motorola][Multi-Tech][Nortel][RAD][Verso][Visual Networks]

ADTRAN
OCTAL BASIC RATE ISDN

ATLAS MODULE - Part# 1200186L1

ATLAS includes an advanced access architecture for switching dial-up calls to specific ports or DS0s. The ADTRAN Octal Basic Rate ISDN (BRI) Module part# 1200186L1 contains eight ISDN U interfaces and combines with other ATLAS components to implement an ISDN access switch. The ADTRAN Octal Basic Rate ISDN (BRI) Module part# 1200186L1 can connect to the ISDN network (NT mode), or it can emulate the ISDN network to other ISDN access devices (LT mode) that support the U Interface, such as terminal adapters and network termination units.

As a component in an ATLAS access switching application, the ADTRAN Octal Basic Rate ISDN (BRI) Module part# 1200186L1 can consolidate multiple Basic Rate ISDN (BRI) connections onto T1/PRI access lines. The module also supports BRI-to-BRI, BRI-to-PRI, and PRI-to-PRI switching. In addition, ATLAS converts between ISDN D channel (PRI or BRI) and T1 robbed bit signaling, allowing non-ISDN equipment to access a more efficient PRI or BRI facility. Moreover, the modules call filtering feature allows you to program on a per-user basis, the call types that will be answered and originated.

Single B channel ISDN calls can be directed to synchronous V.35 ports operating at 56 Kbps or 64 Kbps. For asynchronous applications, ISDN calls can be routed to EIA-232 ports on the Async-232 Module.

The Octal BRI module can be configured through a variety of mechanisms, including Telnet or VT 100 emulation. SNMP management is supported for alarm and event reporting.

The ADTRAN Octal Basic Rate ISDN (BRI) Module part# 1200186L1 includes an extensive array of diagnostic tools to assist in identifying and correcting network problems including a built-in Self-Test utility, local and remote loopback testing for B1, B2, and 2B+D, and performance monitoring to ensure the quality of the ISDN line.

Features of the ADTRAN Octal Basic Rate ISDN (BRI) Module part# 1200186L1

	Eight Basic Rate ISDN U Interfaces
	LT mode and NT mode support
	ANSI T1.601 compliant
	Compliant with Lucent 5ESS, Nortel DMS100, and National ISDN
	Near-end and Far-end block error monitoring
	Maximum distance of 18,000 feet
	Flash upgradable
	Occupies a single slot in the ATLAS chassis
	Hot swappable
	Standard 5-year warranty

OCTAL BRI MODULE APPLICATION EXAMPLE

OCTAL BRI MODULE REAR PANEL

Product Specifications

ISDN INTERFACE

ANSI T1.601-1992 2B1Q U-Interface

PHYSICAL INTERFACE

8-Pin Modular RJ45

BRI LINE RATE

2B+D, 160 Kbps full duplex

U-INTERFACE DISTANCE

18,000 feet with 1,300 Ohm resistance design

SWITCH COMPATIBILITY

Lucent 5ESS, Nortel DMS-100, National ISDN

TERMINATION MODES

	LT (Network Emulation)
	NT (DCE)

DIAGNOSTICS

	Self-test
	B1, B2, & 2B+D Local and Remote Loopbacks

PERFORMANCE MONITORING

Near-End Block Errors (NEBES), & Far-End Block Errors (FEBES)

AGENCY APPROVALS

FCC Part 15, Class A, FCC Part 68, UL, Canadian UL (CUL), Industry Canada CS-03

ENVIRONMENT

	Operating: 0 to 45� C (32 to 113� F)
	Storage: -20 to 70� C (-4 to 158� F)
	Relative Humidity: Up to 95%, non-condensing

POWER

7.5 Watts

PRODUCT INCLUDES:

	Eight RJ45 to RJ11 Cables (7 feet)
	User Manual

SPECIFICATIONS SUBJECT TO CHANGE

Ordering Information

Octal BRI Module - 1200186L1

Download this brochure in pdf format.

Immediate price quote - Call 727-398-5252

Specials E-mail us Bookmark this site More Adtran Important Notices

ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc.
E-mail: Webmaster about the Adtran portion of this site.
Last modified: November 07, 2007

ADTRAN OCTAL BASIC RATE ISDN