[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Micom][Motorola][Multi-Tech][Nortel][RAD][Verso][Visual Networks]

FSU

FRAME RELAY ACCESS
Part# 1200130L1 and 1200130L2

The ADTRAN FSU is a stand-alone frame relay access device (FRAD) that provides a cost-effective means of transporting multi-protocol data over frame relay networks. The ADTRAN FSU provides an easy-to-use interface for customers migrating existing services or developing new applications for operation over frame relay networks.

The FSU provides two independent DTE interfaces for connecting non-frame relay devices to the frame relay network. The DTE ports support synchronous data rates from 2.4 to 512 kbps and asynchronous from 2.4 to 38.4 kbps. Both EIA-232 and V.35 physical interfaces are available for connection to the customers DTE equipment. The FSUs concentrator feature allows the connection of two frame relay devices to a single frame relay network interface.

The FSU may be purchased with an integral 56/64 DDS DSU/CSU or an external DSU/CSU may be connected to the DCE interface. Network speeds up to 512 kbps and both EIA-232 and V.35 physical interfaces are supported through the DCE port.

The FSU supports SNA, SDLC, Bisync, SLIP, IP, PPP (both synchronous and asynchronous), frame relay, BOP, and asynchronous protocols. The DTE ports can be configured independently, providing support for multi-protocol applications.

Embedded SNMP and Telnet are available in-band. SNMP is provided with support for RFC 1315 and MIB II. Through the Management Information Base (MIB)-II standard and an ADTRAN-supplied enterprise MIB, the FSU can be configured, monitored, and diagnosed using standard SNMP network management programs such as HP OpenView®, NetView®, and SunNet Manager®.

Complete control, configuration, and diagnosis are available through a 16-position keypad and a two-line by 16-character LCD display. A VT100 terminal configuration and control mode is also available through the control port. Flash download capability is implemented for installation of new features and enhancements.

Features

	Network Connection via optional 56/64 DDS DSU/CSU or external DDS or FT1 DSU/CSU
	SNMP/Telnet Management
	RFC 1490 encapsulation for IP and LLC2
	SDLC local port spoofing
	IP support using SLIP, PPP-async, PPP-sync, with routing
	Frame relay concentrator mode which allows two frame relay devices to utilize a single network interface
	Prioritization scheme which ensures proper SNA response times in mixed protocol environment
	Frame relay management using ANSI, ITU, or LMI formats
	Easy to use VT 100 interface for configuration
	Standard 5 year warranty

FSU APPLICATION EXAMPLE

FSU REAR PANEL

Product Specifications

OPERATING MODES

Frame Relay utilizing DDS or FT1 circuits

DTE & DCE RATES PROVIDED

	DTE: Synchronous rates: 2.4 to 512 kbps Asynchronous rates: 2.4 to 38.4 kbps
	DCE: Synchronous rates 2.4 to 512 kbps

DTE & DCE INTERFACES

	EIA-232 electrical and physical interfaces
	V.35 electrical, physical with adapter cable

CONTROL PORT INTERFACE

	Electrical: EIA-232
	Physical: RJ-48S (female DB25 adapter provided)
	Data Rates: Async 2.4 to 38.4 kbps

SNMP

	Internal SNMP agent
	MIB II RFC 1213
	Frame Relay DTE MIB RFC 1315
	ADTRAN enterprise MIB
	Telnet Access

PROTOCOL SUPPORT

Concentrator

Frame Relay

IBM Support

	SNA/SDLC with local spoofing
	SDLC/HDLC transparent
	SDLC-LLC2 translation
	Supports up to 20 SDLC PUs on each DTE port

LAN Protocol

	SLIP
	IP-PPP asynchronous or synchronous

Transparent

	Asynchronous transparent
	BOP transparent

Protocol Encapsulation

	IP (SLIP and PPP) and LLC2 protocols are encapsulated using RFC 1490 formats
	All other protocols use proprietary formats and require ADTRAN devices at each UNI

DATA FLOW CONTROL

	Synchronous: Clock slowing
	Asynchronous: CTS or XON/XOFF

DIAGNOSTICS

	CSU and DSU loopbacks
	IP Ping Mode

OPTIONAL 56/64 DDS DSU/CSU SPECIFICATIONS

	Network Data Rates: Dedicated 56 and 64 kbps
	Loop transmission parameters as defined in AT&T PUB 62310: Dedicated DDS
	Line Interface: RJ-48S, 4-wire, full duplex
	Receiver Sensitivity: -45 dB at all rates

AGENCY APPROVAL

	FCC part 15, Class A and Part 68
	Industry Canada CS03
	UL and CUL

ENVIRONMENT

	Operating: 0° to 50° C (32° to 122° F)
	Storage: -20° to 70° C (-4° to 158° F)
	Relative Humidity: Up to 95%, non-condensing

PHYSICAL

	Dimensions: 10.4"D x 8.0"W x 2.4"H
	Weight: 4.5 lbs.
	Power: 115 VAC, 60 HZ, 7 W

SPECIFICATIONS SUBJECT TO CHANGE

Ordering Information

	FSU - 1200130L1
	FSU w/56/64k DSU/CSU - 1200130L2
	V.35 Adapter Cable Male 6ft. - 1200193L1
	V.35 Adapter Cable Female 6ft. - 1200194L1

Download this brochure in pdf format.

Immediate price quote - Call 727-398-5252

Specials E-mail us Bookmark this site More Adtran Important Notices

ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc.
E-mail: Webmaster about the Adtran portion of this site.
Last modified: November 07, 2007

FSU

FRAME RELAY ACCESS Part# 1200130L1 and 1200130L2