


ADTRAN®’s TSU 100™ (
1202052L2 ) and TSU 100e™ ( 1202052L1 ) are modular, full-featured T1/FT1 Multiplexers designed to support a wide range of end-user applications.
ADTRAN®’s
TSU 100™ ( 1202052L2 ) and
TSU 100e™ ( 1202052L1 ) are
equipped with a synchronous V.35 DTE interface, the ADTRAN® TSU
100™ ( 1202052L2
) and TSU
100e™ ( 1202052L1
) supports
applications combining high-speed data with additional end user applications.
As interface requirements increase, the flexibility of the ADTRAN® TSU
100™ ( 1202052L2
) and TSU
100e™ ( 1202052L1 ) benefit the
user with modularity through their expansion slot. The ADTRAN® TSU
100™ ( 1202052L2
) and TSU
100e™ ( 1202052L1
)
provide complete monitoring and control of the T1 network with embedded
simple network management protocol (SNMP) pro-vided through a SLIP interface.
The TSU 100e ( 1202052L1 ) also has a built-in 10BaseT Ethernet interface. To
support critical data applications, the built-in V.35 interface on the TSU 100e
( 1202052L1 ) can be converted to provide dial backup functionality during T1
failure conditions. This feature is supported by the interface and is available
using an optional V.35 “Y” cable. Support for future growth, through the
unit’s single expansion slot, is a key feature of the ADTRAN® TSU
100™ ( 1202052L2) and TSU
100e™ ( 1202052L1). The ability
to combine many types of plug-in and plug-on modules provides extensive
combinations of voice and data interfaces. Several data modules are available
for single and dual-port access to Frame Relay, DDS or Basic Rate ISDN services
provided over T1 facilities. Voice modules are also easily integrated allowing
access to analog voice circuits or additional PBX connections. As a fully
functional T1 Multiplexer, the ADTRAN®’ TSU
100™ ( 1202052L2
) and TSU
100e™ ( 1202052L1
) support
all mixed-mode networking applications providing termination for circuits
containing voice, data and video channels. Configuration and management of the
TSU 100(e) is available through a variety of methods. The ADTRAN®’ TSU
100™ ( 1202052L2
) and TSU
100e™ ( 1202052L1
) support
SNMP with Gets, Sets and Traps functionality through a built-in agent. ADTRAN
MIBs support management for the ADTRAN®’ TSU
100™ ( 1202052L2
) and TSU
100e™ ( 1202052L1
) and
all installed expansion modules. For access to SNMP features, the TSU 100e has
both a 10BaseT Ethernet and a SLIP (EIA-232) connection, while the TSU 100 has a
SLIP interface only. In addition to SNMP, the unit utilizes the management
capabilities found in optional software products from ADTRAN. For Windows-based
management, the ADTRAN®’ TSU 100™
( 1202052L2 ) and TSU 100e™
( 1202052L1 ) are compatible with the
popular T-Watch PRO™ software
package. For more complex network management systems, ADTRAN’s ADVISION™
operates on an SNMP enterprise management
system such as HP OpenView™ and
provides full GUI configuration and control via SNMP.
Product
information:
ADTRAN®’ TSU 100™
( 1202052L2 ) and TSU 100e™ (
1202052L1 ) data sheet (pdf 71 k)
ADTRAN®’ TSU 100™
( 1202052L2 ) and TSU 100e™ (
1202052L1 ) manual (pdf 2311 k)
Adtran Nx56/64 expansion data interfaces for the TSU multiplexer family - data
sheet (pdf 89 k)
Adtran 2FXO expansion module for the TSU multiplexer family - data sheet (pdf
165 k)
Adtran FXS, E&M, FXO expansion module - data sheet (pdf 172 k)
Adtran DSU III Module for TSU multiplexer familiy - data sheet (pdf 50 k)
Adtran DSX-1 interface module for TSU family - data sheet (pdf 92 k)
Adtran NetVanta Router module for TSU family - data sheet (pdf 617 k)
Adtran OCUDP Office Channel Unit Data Port Interface for TSU Multiplexers - data sheet
(pdf 41 k)
Part
numbers: