ADTRAN - Call 727-398-5252 : Cutter Networks

[Home][Adtran][Cisco][Motorola][Multi-Tech][RAD]

ADTRAN section home tab ADTRAN and other WAN / LAN specials Search for ADTRAN or other WAN / LAN equipement Request a quote on ADTRAN or other WAN / LAN equipment

Adtran logo  (641 bytes)
Adtran
Tracer Microwave Dual  T1 Rackmount

Adtran_Tracer.GIF (31818 bytes)

The ADTRAN Tracer is an unlicensed digital microwave radio that uses spread spectrum technology to provide two, independent T1 communication links. As authorized under part 15.247 of the FCC Rules, Tracer operates in the 2.4 - 2.4835 GHz industrial, scientific, and medical (ISM) band.

The Tracer is composed of two primary hardware elements; a Baseband Processor (BBP) and a Radio-Frequency Converter (RFC). All signaling and power functions between the BBP and the RFC are provided over this single coax connection.

Tracer transports two T1 digital signals in any framing or line code format and provides two DS1/DSX-1 interfaces. A separate maintenance channel is embedded in the Tracer data stream, providing remote configuration and monitoring functions. The maintenance channel is provided without impacting the T1 capacity.

By using the latest technology and incorporating ADTRAN's ISO 9001 manufacturing processes, ADTRAN has designed Tracer to provide the highest levels of reliability and durability. As a result, Tracer is backed by an industry-leading standard 5 year warranty and ADTRAN's outstanding 24-hour technical support.

Features

bulletDigital microwave radio
bulletDual T1
bulletNo license required: FCC rules part 15.247
bulletDirect sequence spread spectrum
bulletFrequency 2.4 to 2.4835 GHz
bulletFrequency agile
bulletRemote loopback
bulletRemote control of far-end
bulletPoint-to-point, up to 30 miles
bullet2U, 19-inch rack space
bulletIndustry leading 5 year warranty

 

TRACER™ APPLICATION EXAMPLE

2xT1 BASEBAND PROCESSOR

RACK-MOUNTED RFC

Product Specifications

TRANSMITTER

bulletOutput Power: +20 dBm, Max
bulletFrequency Band: 2.4 to 2.4835 GHz
bulletChannel Bandwidth: 40 MHz
bulletIntermediate Frequency: 140 MHz

RECEIVER

bulletReceive Level Threshold: -91 dBm (10-6 BER)
bulletReceive Level Max: -30 dBm
bulletReceive Level Nominal: -60 dBm
bulletFrequency Range: 2.4 to 2.4835 GHz
bulletChannel Bandwidth: 40 MHz
bulletIntermediate Frequency: 70 MHz

FREQUENCY PLAN

bulletA-TX 2.422 GHz . . RX 2.462 GHz
bulletB-TX 2.462 GHz . . RX 2.422 GHz

SPREAD SPECTRUM DATA PUMP

bulletModulation: QPSK
bulletSpreading Method: Direct Sequence
bulletCodes: 10
bulletCode Length: 120
bulletProcessing Gain: > 12 dB
bulletSpreading Rate: 12 times

RADIO FREQUENCY CONVERTER

bulletPreselector Filter: Cavity tuned
bulletAntenna Port: N-type, female
bulletImpedance: 50 Ohm

DIGITAL INTERFACE

bulletCapacity: 2 x T1
bulletData Rate: 2 x 1.544 Mbps
bulletDigital Interface: DS1, DSX-1
bulletConnection: RJ-48C, Bantam
bulletMonitor: Bantam
bulletLine Code: AMI, B8ZS
bulletFraming: SF, ESF
bulletAlarms: YEL/AIS, Red, BPV
bulletLoopbacks: Local & remote

USER INTERFACE

bulletFront Panel: Status LEDs, configuration switches
bulletDiagnostics: T1 loopback, remote test with BERT, self-test
bulletTest Points: RSSI, system voltages, I & Q
bulletAlarm Contacts: Major, minor (normally open or closed)

TERMINAL INTERFACE

bulletFunction: Menu-driven user interface, monitor & control of local & remote end, password protected, event history
bulletData Rate: 9600 Bps
bulletEmulation: VT 100
bulletConnection: DB-25 (RS-232)

MECHANICAL & ENVIRONMENTAL

Baseband Processor

bulletOperating Temperature: 0 to 50 C
bulletWidth: 16.75", (for 19" EIA rackmounting)
bulletHeight: 1U (1.75")
bulletDepth: 11.5"
bulletHumidity: 95%, non-condensing
bulletWeight: 6 lbs

Rack-mount RFC

bulletOperating Temperature: 0 to 50 C
bulletWidth:16.75", (for 19" EIA rack mounting)
bulletHeight:1U (1.75")
bulletDepth: 11.5"
bulletHumidity: 95%, non-condensing
bulletWeight: 9 lbs

Power

bulletInput Voltage: 21-56 VDC
bulletPower Consumption: 30 watts, (amperage=30 watts/voltage)
bulletDC Connector: 3-pin screw clamp
bulletAC Adapter Connector: 3-pin DIN

Systems are shipped with pre-configured frequency plans, but may be switched without additional equipment to accommodate either plan
 
Tracer is also available in a Rack Mount configuration. For information on this equipment please see ADTRAN Document Number 64280TRACERT1L2-8B.
 
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Ordering Information

bullet2xT1 Mast-mounted system, preconfigured frequency plan A - 4280TRACERT1L2-A
bullet2xT1 Mast-mounted system, preconfigured frequency plan B - 4280TRACERT1L2-B

Ordering Information

bulletFCC PART 15.247 - HDCTRACER2T1
bulletFCC Part 68 - HDCUSA-32567-DE-N
 

                    Immediate price quote - Call 727-398-5252

Specials   E-mail us   Bookmark this site   More Adtran    Important Notices

Use Visa to purchase Data Communications Equipment    Use MasterCard to purchase ADTRAN Equipment
ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc.Adtran Logo
E-mail: Webmaster about the Adtran portion of this site.
Last modified: June 10, 2016