ADTRAN - Call 727-398-5252 : Cutter Networks

[Home][Adtran][Cisco][Eastern Research][GDC][Kentrox][Motorola][Multi-Tech][RAD][Verso][Visual Networks]

Adtran section home Adtran Specials and more Adtran section search Adtran quote request

Adtran

The Adtran TDU 120e(T1 Distribution Unit, part# 1202155L2, 1202156L2) is an intelligent, full-featured, NEBS compliant,T1 DSU/CSU in a 1U high 19-inch rackmount enclosure.

The Adtran TDU 120e (part# 1202155L2, 1202156L2)  is designed to interface customers data terminal equipment (DTE) to T1 or fractional T1 services, the Adtran TDU 120e is fully compatible with D4 or ESF framing formats with AMI or B8ZS coding. When in ESF framing mode, the Adtran TDU 120e  satisfies ANSI T1.403 and AT&T 54016 modes for utilization of the facility data link (FDL). The Adtran TDU 120e  uses option modules identical to those used with ADTRAN® TSU™ units. The Adtran TDU 120e (part# 1202155L2, 1202156L2)  also provides complete monitoring and control of the T1 network with embedded simple network management protocol provided through both a SLIP and a 10Base-T Ethernet interface. A base V.35 and DSX-1 (PBX) interface is provided on the rear of the Adtran TDU 120e. The V.35 interface can be configured to operate synchronously at Nx56 or Nx64 data rates where N=1 to 24. The channels used can be selected at random. The DSX-1 interface is a short haul T1 interface intended for connection to a PBX, cellular/PCS switch or similar device. The channels used by the DSX-1 port can also be selected at random. To further add to the flexibility of the Adtran TDU 120e (part# 1202155L2, 1202156L2) a slot on the rear of the unit is featured that accepts a single expansion module. A wide variety of application specific modules are available to provide flexibility and expandability. Configuration and management of the TDU 120e is available through a variety of methods. The TDU 120e supports SNMP with gets, sets, and traps functionality through a built-in agent. ADTRAN MIBs support management for the TDU 120e and all installed expansion modules. For access to SNMP features, the TDU 120e has both a 10Base-T Ethernet and a SLIP (EIA-232) connection. In addition to SNMP, the unit utilizes the management capabilities found in a variety of optional software products from ADTRAN.  

bullet1202155L2 Adtran TDU 120e, DC 
bullet1202156L2 Adtran TDU 120e, AC 

 Product information:

Adtran TDU 120e (part# 1202155L2, 1202156L2) T1/FT1 Rackmounted DSU/CSU with Embedded SNMP data sheet (pdf  71k)

Adtran TDU 120e (part# 1202155L2, 1202156L2) operations manual (pdf 3261k)

                    Immediate price quote - Call 727-398-5252

Specials   E-mail us   Bookmark this site   More Adtran    Important Notices

Use Visa to purchase Data Communications Equipment    Use MasterCard to purchase ADTRAN Equipment
ADTRAN and the ADTRAN logo are registered trademarks of ADTRAN, Inc.Adtran Logo
E-mail: Webmaster about the Adtran portion of this site.
Last modified: February 07, 2012